Sindre   seperate Tonearm

Bergmann tonearms are available separately.

Gallery. Click to enlarge

 

 

 

Sindre Tonearm system

The tonearm is a linear tracking airbearing tonearm. It tracks the record as it is pressed. A linear tracking airbearing tonearm can be produced in several ways. We have choosen the following construction: A long fixed air pipe with small vents creates a frictionless air film on which a sliding pipe gently floats. The arm tube is mounted on this sliding pipe. In this construction you avoid an air tube which inevitably interferes with the arm's freedom of movement. This type of arm is simple to adjust perfectly. The tonearm is made in a very hard aluminium alloy to secure the best stability as possible. The arm tube is made of carbon fibre - again to secure the best stability as possible. The head shell, made in the same hard aluminium alloy as the rest of the tonearm, is completely parallel with the sliding pipe, which results in a perfect azimuth. The internal wire is twisted in one piece from clips to plugs to avoid too many solderings in the extremely sensitive signal path. The tonearm has VTA adjustment and a possibility for perfect horizontal adjustment of the air pipe, independent of the plinth. The tonearm can be moved forward and backward on the plinth. Adjustment tools are enclosed.

 

Technical Specifications

Tonearm:                          Linear tracking airbearing tonearm. Hard aluminium aloy/carbon.

Effectiv Mass:                      10gr.

Airsupply:                         Silent, clean, dry and smooth airflow.
                                          Easy accessible dust filter, for easy cleaning or replacement.

Dimension:                          300 x 155 x 155 (D x W x H)